CR-10 Y-axis purchased drag chain with solid bed mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steven Fayer's CR-10 Y-axis drag chain changed to work with a purchased 10x15mm R18 chain along with solid bed mounts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After upgrading my CR-10S to use kevinakasam's Belted Z mod, I wanted to reprint my drag chain to color match. Before the Belted Z mod I had printed it in PLA and it was great. However, I printed it in ABS and I kept having trouble with it staying connected (extra wires for calibrate z mod).
I modified it to work with a purchased 10x15mm R18 drag chain from Amazon. https://www.amazon.com/gp/product/B09579CTBG/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
This also wraps around TH3D's old solid bed mounts. It would need to be modded to work with the original springs.
combo_YZ_bracket_v7: Use the brackets that came with the cable chain along with heatset inserts with some short screws.
combo_YZ_bracket_v7_short: I'm using this since I'm not using chain on the Z-axis. It gives me something to zip tie my wires to that go to X and to the hotend in order to keep them from flopping around.
combo_YZ_bracket_v5: retired - link broke too easily when trying to insert the chain.
Revisions:
- 2024-06-02
- Changed the combo_YZ_bracket to use heatset inserts with the bracket that comes with the chains.
- Added a short version just in case you don't really use the Z-Chain (I wanted to still make sure that everything printed correctly so I just shortened the height by 100mm).