1 / 9
Vidroc SQ13 camera mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vidroc SQ-13 camera mounts The SQ-13 is a cute little camera. that I whipped up some mounts for in Fusion 360. If you…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Vidroc SQ-13 camera mounts
The SQ-13 is a cute little camera. that I whipped up some mounts for in Fusion 360.
If you want to tweak the design here are links to the 360 files.
- BT-50
- BT-60
54mm Notes:
All the nose cone caps will need to be fastened either with small screws or CA glue.
- Each nose cap has a hole at the tip for attaching a parachute line.
- There is a notch in the shoulder so the parachute line doesn't bind with the airframe.
- The camera does snap into place but you should consider using a small screw to lock the camera onto the nosecone.
- There is a lot of room inside these for possible avionics.
Category: Hobby