1 / 9
Vidroc SQ13 camera mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vidroc SQ-13 camera mounts The SQ-13 is a cute little camera. that I whipped up some mounts for in Fusion 360. If you…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Vidroc SQ-13 camera mounts
The SQ-13 is a cute little camera. that I whipped up some mounts for in Fusion 360.
If you want to tweak the design here are links to the 360 files.
- BT-50
- BT-60
54mm Notes:
All the nose cone caps will need to be fastened either with small screws or CA glue.
- Each nose cap has a hole at the tip for attaching a parachute line.
- There is a notch in the shoulder so the parachute line doesn't bind with the airframe.
- The camera does snap into place but you should consider using a small screw to lock the camera onto the nosecone.
- There is a lot of room inside these for possible avionics.
Category: Hobby