Mini Skidi Integrated Battery Holder Compartment Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Prof Boots V2 or V3 Mini Skid Loader. It is designed to hold the rechargeable CR123 batteries on the rear cover.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Swap batteries faster and add counterweight with this rear compartment hatch battery holder! You will need battery tabs for this model. I ordered mine from Mouser:
https://www.mouser.com/ProductDetail/Keystone-Electronics/5204?qs=U32tdPngY%2FwtFSyZk7NcfA%3D%3D
https://www.mouser.com/ProductDetail/534-5226
I pressed the lower tabs in first and soldered a wire between them. Then I soldered wires to the upper tabs and pressed them in after attaching the wires, routing the wires down through the holes in the model.
Print orientation: I printed mine with the battery holder facing down, as though the Skidi is laying on it's back. I added supports.
Thank you Prof Boots for making the Mini Skidi!