Mini Skidi Integrated Battery Holder Compartment Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Prof Boots V2 or V3 Mini Skid Loader. It is designed to hold the rechargeable CR123 batteries on the rear cover.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 43
- Makes
- 0
- Views
- 682
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Swap batteries faster and add counterweight with this rear compartment hatch battery holder! You will need battery tabs for this model. I ordered mine from Mouser:
https://www.mouser.com/ProductDetail/Keystone-Electronics/5204?qs=U32tdPngY%2FwtFSyZk7NcfA%3D%3D
https://www.mouser.com/ProductDetail/534-5226
I pressed the lower tabs in first and soldered a wire between them. Then I soldered wires to the upper tabs and pressed them in after attaching the wires, routing the wires down through the holes in the model.
Print orientation: I printed mine with the battery holder facing down, as though the Skidi is laying on it's back. I added supports.
Thank you Prof Boots for making the Mini Skidi!