1 / 3
Guide Rail Adapter Bosch FSN to Makita DRT50 Big Basket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use a Makita DRT50 router (big basket) on a Bosch FSN guide rail.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
The adapter comes in two parts: the base plate and the guide rail adapter.
To connect both you'll need:
two 5x16mm bolt screws
two wing nut (5 mm)
two 5mm washers
The bolt screws have to be pushed into the baseplate (I used a hammer, but carefully!).
Note: The base plate needs to be printed with support (for the bolt holes).
Note 2: the distance between the rail and the middle of the base plate is 83mm.
