1 / 3
Guide Rail Adapter Bosch FSN to Makita DRT50 Big Basket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to use a Makita DRT50 router (big basket) on a Bosch FSN guide rail.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 56
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The adapter comes in two parts: the base plate and the guide rail adapter.
To connect both you'll need:
two 5x16mm bolt screws
two wing nut (5 mm)
two 5mm washers
The bolt screws have to be pushed into the baseplate (I used a hammer, but carefully!).
Note: The base plate needs to be printed with support (for the bolt holes).
Note 2: the distance between the rail and the middle of the base plate is 83mm.
