1 / 11
Black Powder Motor (Estes) Stand-ins
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I developed this to act as BP motor stand-ins that would also allow me to add weight to them in order to match a full…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 529
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
I developed this to act as BP motor stand-ins that would also allow me to add weight to them in order to match a full motor I want to simulate.
This way you don't have to handle 'live' motors or dirty used ones. (yeah, I know it's trivial but heck, I have a 3D printer, so....)
I found the 13mm motors too difficult to get a good thread working, so I just made that a friction cap.
Note: I have added the 29mm motor case.
Category: Hobby