1 / 10
Generator Toy, LED R, G, Y, W etc /low voltage coupeling — zdjęcie 1
1 / 10

Generator Toy, LED R, G, Y, W etc /low voltage coupeling

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Store the electricity generated by a handcrankgenerator in a Capacitor and power a led or a tiny motor etc.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Steppermotor, Bearing and Gears from Prusa mini Extruder. Probably possible without the gears, but not as comfortable to crank. (I'm not sure if i changed the big axle on the lathe, but i filed a flat spot on for the crank) → Look for: 25 : 1 ratio planetary gearbox for NEMA 17 stepper /by Ondrej

HY-CAP 25F 3V Superkondensator/Capacitor (secured in place on the outside with hot glue) (cut an bend the wires like the LED's)

LED's 5.5 mm (bend and cut as shown on the pic.) (no glue)

Brückengleichrichter/bridge rectifier (don't have to be as big as on the pics)

Step down board DC/DC (LM2596 DC-DC Step-Down; roboter-bausatz.de* ) 50 V Caps on the Input.
Set the Voltage to 2.7 to 2.8 V
screwed on without Inserts 

Screws, Inserts, Magnets, Nuts 

1 pcs. M4x25 + Stopnut

4 pcs. M3x12 + 9 Inserts

5 pcs. M3x20

1 pcs. M3x15

8 pcs. M3x6

min. 6 pcs. Neodym Magnet D 3 mm, L 6 mm (no glue only pressfit)

Look for: 25 : 1 ratio planetary gearbox for NEMA 17 stepper /by Ondrej