Generator Toy, LED R, G, Y, W etc /low voltage coupeling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store the electricity generated by a handcrankgenerator in a Capacitor and power a led or a tiny motor etc.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Steppermotor, Bearing and Gears from Prusa mini Extruder. Probably possible without the gears, but not as comfortable to crank. (I'm not sure if i changed the big axle on the lathe, but i filed a flat spot on for the crank) → Look for: 25 : 1 ratio planetary gearbox for NEMA 17 stepper /by Ondrej
HY-CAP 25F 3V Superkondensator/Capacitor (secured in place on the outside with hot glue) (cut an bend the wires like the LED's)
LED's 5.5 mm (bend and cut as shown on the pic.) (no glue)
Brückengleichrichter/bridge rectifier (don't have to be as big as on the pics)
Step down board DC/DC (LM2596 DC-DC Step-Down; roboter-bausatz.de* ) 50 V Caps on the Input.
Set the Voltage to 2.7 to 2.8 V
screwed on without Inserts
Screws, Inserts, Magnets, Nuts
1 pcs. M4x25 + Stopnut
4 pcs. M3x12 + 9 Inserts
5 pcs. M3x20
1 pcs. M3x15
8 pcs. M3x6
min. 6 pcs. Neodym Magnet D 3 mm, L 6 mm (no glue only pressfit)
Look for: 25 : 1 ratio planetary gearbox for NEMA 17 stepper /by Ondrej
