VIVO - Camera clip for VIVO Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Camera clip (or anything requiring a 1/4-20 screw) mount for VIVO Arm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
Hey everyone,
I modelled this camera mount for the VIVO Arms. In my case I had a PTZ Camera I wanted to mount but anything with a ¼-20 thread will fit. Make sure you use the right screw length, in my case I had a ¾" long ¼ -20 so I had to adjust the model to that. Modeled this for the Panhead to not interfere with the mount. Height wise is a little lose on the arm so you can clip it in without breaking but with the weight of the camera it stays there pretty good.
Print Settings:
Printed using PETG
0.2mm LH
4 Vertical shells
4 bottom/top shells
10% infill
Supports required, I used Grid supports on the model and had no issues.