VIVO - Camera clip for VIVO Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small Camera clip (or anything requiring a 1/4-20 screw) mount for VIVO Arm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Standard Digital File License
Hey everyone,
I modelled this camera mount for the VIVO Arms. In my case I had a PTZ Camera I wanted to mount but anything with a ¼-20 thread will fit. Make sure you use the right screw length, in my case I had a ¾" long ¼ -20 so I had to adjust the model to that. Modeled this for the Panhead to not interfere with the mount. Height wise is a little lose on the arm so you can clip it in without breaking but with the weight of the camera it stays there pretty good.
Print Settings:
Printed using PETG
0.2mm LH
4 Vertical shells
4 bottom/top shells
10% infill
Supports required, I used Grid supports on the model and had no issues.