275 models
This is the iconic three tiered pole puzzle Michele Fitzgerald crushed that was featured on Survivor 32 Kaôh Rōng. This puzzle also appears on Survivor 40 Winners at War with some slightly altered pieces. I will be creating a remixed…
This is a charging stand for the Garmin Vivoactive 4. Simply insert the original cable from the bottem and secure it in the slot. The part prints without supports. With the 0.3mm Draft profile on an MK3 it will take less than an hour.…
Welcome to RUST…You’ve just crafted the ultimate low-maintenance companion: the Rust Hazmat Funko-Style Miniature , perfect for your desk, display shelf, or guarding your IRL loot stash. No need to farm scrap or recycle 83 toasters—this…
All of the other tree puzzles online had pieces that need to be sanded on all sides that touches each other/the tree. I did not want to go through that much effort, so I traced the puzzle myself in fusion 360 and made sure to double trace…
Hey! This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides…
This is s remix of DalbyTech's Garmin Fenix5 watch charging stand. I wanted a charging stand for my Vivoactive 3 and just added a charge cable hole to the 12 o'clock position for the charging cable using Tinkercad. Print instructions…
Based on my charging stand for Epix watches, I made this modification for Vivoactive 5 wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on the end……
The Garmin Vivoactive 4S smartwatch is smaller than version 4 and the original stand didn't fit my needs. Patrick was so kind to publish his original model as step file, so I was able to resize and redesign it a bit to fit 4S version. The…
The original lens bezel is prone to break if tightened a bit to hard. This usually happens if the lens does not snap into place and you don't notice it while tightening. In the original bezel there is a small groove for a rubber o-ring,…
I designed it for my garmin vivoactive 3 with closed strap, and my wife's forerunner 45s. v1.4 - only for vivoactive 3. v2.2 - for VA3 and FR45s and maybe else. v3.0 - slim version - not yet printed for VA3 and FR45s and maybe else.…
Here I have my model of the Quickdraw blaster seen in the Jedi Survivor game. There were no free models available so decided to make my own. I have taken many screenshots from within the game itself to try and get all the details in…
Beim LMC Vivo 530 K habe ich das Problem, dass die hintere Umrissleuchte im weg ist, wenn man die Dachstangen der Wigo abstützen möchte. Ich habe das Teil in PETG mit 25% Infill als Gyroid gedruckt. Das sollte ausreichen, muss aber jeder…
Assemble all of the pieces into a (3x3x3) cube that fits inside the provided base. This is a small version of the cube puzzle from Bhanu's journey on Survivor 46. You'll need 3x of the 1x1x1 “cubes” and 6x of the 1x2x2 “boxes”.
As seen on Survivor 46 (Episode 2) (and a similar puzzle on Survivor 45 (Episode 11)). When correctly solved, the word “PERSISTENCE” can be read from both sides of the arch. I was able to print without supports as long as I was printing…
The classic Survivor Ball Puzzle, just 4 pieces but some teams never figure it out. Authorized Retailer: https://3DPrintTwistIQ.etsy.com/listing/4311121907
Just 3 styles of Tokens from the Survivor TV show
This a recreation of the Survivor Season 41 - 75 Piece Logo Puzzle. Technically there are 76 puzzle pieces in this version. I copied the puzzle based on screen captures from the season and ended up with 76 pieces. Not sure what happened,…
This puzzle features the Survivor 47 logo on both sides. I recommend printing in the orientation the files are already in & using tree/"natural" supports for a consistent finish across all blocks.
This is replacement loop to secure watch strap of Garmin Vivoactive 3. Print instructions Print with one perimeter and no infill.
Vivo Verto - Where the magic of design meets the precision of 3D printing. Derived from the Latin words for "live" and "transform," VivoVerto panels are meticulously crafted to breathe life into any space. These panels aren't just about…
A quick mount for the Blue Yeti microphone so it can attach to a VIVO monitor stand. Designed for a ~35mm diameter monitor stand. .step and .f3d files included. Print instructions Category: Office Summary A quick mount for the Blue Yeti…
This is a Google Home Mini mount designed to work with a VIVO Monitor arm stand with a 30mm tube exterior diameter. Uses 2 M5 bolts and nuts, one 10mm and one 20mm. This is a remix using the following file:…
An adapter for using standard watch bands with a Garmin Vivosport. Print instructions I love my Garmin Vivosport watch, with one glaring exception; the non-replaceable (and not particularly rugged) band. Rather than deal with factory…
My Vivoactive 3's keeper broke, and instead of buying a replacement band from Garmin, I found it quicker and easier to design and make my own. May also work with other Garmin models as well. Print instructions Filament: Fillimentum…
please use this motel to make other awareness like the cancer soldier
This piece is a replacement for a broken cap (you will need the acrylic, orings, and cone from the broken one). The acrylic is pressure fitted (I have to put the acrylic on the fridge to fit without force). Printed in PETG with supports…
You are doing me a big favor by clicking the Like button :-) H0 shop from the Netherlands Curtains and store inventory attached as photo file This is just the store, not the scenery and cars
Vivo Y36 robust or normal phone case, to be printed with TPU .
A little stand for ASUS Vivobook Pro 15, I believe it will be usable for different notebooks too. (model is withou “Y” logo) My printing setting: Layers - 0,3mm DRAFT Material - PLA/PETG Filling ~30% No supports needed
Works for most vivo monitor poles - allows for vertical or horizontal angles. You can print two of these to mount two play bars to the same pole (use the second screw hole near the end of the play bar for the second mount). Use the…
Eine Lichtfalle für die kleineren Abdeckungen am Zelt zur besseren Belüftung. Angebracht mit Klettverschluss.
This is a replacement mount for a VIVO dual monitor Vesa arrangement. I somehow lost one of the actual mounting plates that goes onto the monitor, so this is a replacement. Currently the screw doesn't quite line up but the mount still…
Charging stand for Garmin Vivoactive 6. I hate the charging port design and location on this watch because it does not rest properly on any flat surface while charging. To solve this, I created this charging stand to allow [almost]…
Just a case with an integrated pay card holder.
Modeled closely to resemble VIVO (or generic) monitor arms. I needed more range to adjust my 27" ASUS monitors (approx 21lbs). This can possibly allow large monitors (untested). Uses M8 55mm bolts + Locking Nuts M8 Round washers (print or…
Use the 8 pieces within the base to construct a 3-tier platform! There are lines around the outside of all the pieces to be able to tell which faces are “outside” pieces & which faces point “inward” to the puzzle. This puzzle was featured…
I recently purchased a cheap Vivosun hydroponic vertical growing system from Amazon with 36 holes for plants. Everything is pre-cut which is a nice time saver- but for some reason they've chosen to make all their holes square. And…
Description This is a FREE digital 3D model of a lightsaber from Star Wars: Jedi Survivor. The design faithfully replicates the look and feel of the lightsabers in the game. The coolest part? It’s part of a complete collection of all 19…
Don't like the investigator cards and don't have the minatures for Arkham Horror (the card game), no problem. Here is a Survivor Token rising from the flames for you.
Two versions: one simple, the other with a small protrusion (as on original strap keeper). Use flexible material (TPU), 100% infill.
A survivor pack for dummy 13. I recommend these print settings: Supports: yes Supports only touching build plate. Kinda inspired by the STALKER series.
Models of Cal Kestis' new lightsaber pommel and matching grip (available as a complete part or split into halves), as seen in the Star Wars Jedi Survivor trailer. These have 12.7mm ID hole features for adapting onto existing sabers such…
Step into survival mode with this Post-Apocalyptic Survivor , a dynamic modern action figure sculpted for gritty horror and urban combat scenes. Caught mid-stance with a baseball bat raised and ready, this rugged survivor embodies tension…
Simple spacer to raise up a VIVO monitor mount using the C-clamp attachment.
This is a simple adapter for connecting a 4'' flexible hose to the holes of a VIVOSUN grow tent. Meant for connecting an active exhaust system when housing printers inside of a grow tent to contain fumes, dust, VOCs and smells. We have a…
"My extraction point is here." Capture the cold, brutal efficiency of Umbrella's most infamous operative with this figurine of Hunk. Known only as 'The Grim Reaper' for his uncanny ability to be the sole survivor of any mission, this…
Put together the 6 puzzle pieces (& base/top) to form a cube! This puzzle was featured on Survivor 47: Episode 1, as part of the marooning challenge. Print 2 of these and race against your friends for the coveted immunity necklace!
Print in place watch band for any watch with a 22mm band. The original file on thingiverse recommends 0.1 mm resolution but 0.2 worked just fine (but the 0.1 mm will probably look better). In the pictures its printed with PLA but tested…
Made a way too sturdy clamp for my son's Vivo Monitor Desk Mount (https://www.amazon.com/gp/product/B009S750LA). He has moved from a dual monitor setup to a laptop plus external monitor setup and we wanted to re-use the monitor arm for a…
Just a solid body of VIVO X200 Pro Mini. Accurate enough to fashion DIY cases, holders, stands etc.
Garmin vivoSport belt - retaining ring
Amazon Link here: https://www.amazon.com/Joystick-Throttle-Designed-Thrustmaster-MOUNT-JS1-pc/dp/B0C2X8N3WP/
The watchband tail retainer broke on my Vivosmart 3. Again. Garmin was kind enough in the past to provide a replacement, but this watch is discontinued. Rather than pay $6 for 5 replacements off Amazon, I designed this. Printed with…
"This is how you died." A stylized 3D miniature of the iconic Project Zomboid survivor. Armed with a reliable axe and a heavy backpack, this survivor is ready for the Knox Country apocalypse. The model is specially optimized for FDM…
I created two different sizes, but only printed the smaller version that is pictured. You can print the blocks in different colors, or all at once with the same filament. The base is printed with a color change at the lettering. I have…
Contains Bleach Container, Water Bottle, TV Dinner, D-E Pistol, and Crowbar from Project Zomboid.
Bianca Ramba - Vampire Survivors Figurine is a collectible character figurine 3d model for fans of the Vampire Survivors game, ideal for anyone searching for a bianca ramba stl, vampire survivors character stl, or video game figurine for…
Made this on Meshy for the new season of Survivor and thought it looked pretty good, so I wanted to share it with others
Printed with PETG in 0.15mm STRUCTURAL settings. Interested in full data? Purchase here:
A fierce and resilient Female Survivor ready for the apocalypse. This model features detailed gear, realistic clothing wear, and a determined stance. Excellent for collectors of sci-fi, horror, and post-apocalyptic themes. Ready to print…
Just a lil Survivor IO Character with a Kunai
Model A simple charging stand compatible with the Garmin Vivoactive 3 series of smartwatches. Not compatible with Garmin watches with the charger to the side instead of on top. Printing Instructions I used Hatchbox white PLA for my print…
Shorter band, and a less intrusive lock ring compared to the original. Can print on the side, but if the holes rip, better to print it flat for strength.
How to charge a Garmin Fenix (5) without charging cable? DIY, building your own cable. Designed with FreeCAD, moddels available. To charge the watch, you can use the two outer connections for charging, regardless of polarity (works in…
The holder for my Vivosport watch band broke and since the band is integral to the watch, I thought I'd take a stab at making a replacement holder out of TPU. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Scaled the fan up to match the duct dimensions, and added a post that allows it to screw into the motor. 23hour print at 0.15m with supports
When Christmas ‘22 came around, I decided to commemorate the passing of the last Covid lockdowns earlier that year with this statue. Also it was be a cheap, mass-producable Christmas gift (don't judge me). The statue consists of two…
Replacement cable hooks that allow for more and thicker cables than the ones that come with these Amazon monitor arms. Two hook sizes available - normal and larger Both hooks latch onto a 3x2cm rectangular monitor arm Works great with PLA…
Arca Ladonna - Vampire Survivors Figurine is a character figurine stl and 3d printable model based on the vampire survivors game, made for collectors, dioramas, and tabletop display. This game character model is ideal for desk and shelf…
This is a Garmin Vivoactive 3 charging stand angled at 35 degrees with a hole to plug the charging cable in the back of the watch. The hole is located at the top. Some other charging stands have the holes in different locations so be…
Simple design, wanted to tailor it to my watch and how it felt. It's a snug fit. Printed using Ninjatek Cheetah TPU with a 0.6mm nozzle and supports.
post apocalyptic survivor minix figure
I liked SwarleyAUS's remixed grip for CaseStudyno8's Cal Kestis' Lightsaber . I had problems with the hole being all the way through SwarleyAUS' grip so, I remixed it with Tinkercad. This remix should work with the original connector from…
VIVO V20 Pro Phone case with custom K letter on the case, comes out beautifully. Print Slow. First layer if there are few gaps, its ok let it print, second layer will cover it.
"Not bad, huh?" Immortalize the triumphant return of Leon S. Kennedy with this high-intensity figurine from Resident Evil: Requiem . This model captures the legendary agent as he appears in his 2026 Raccoon City return—older, grittier,…
Another version of the 2020 Ornament printed on the MK3 with MMU2.
Summary My take on the Ball Drop challenge from 41, Ghost Island, Philippines, and Micronesia . These are thick handles with very basic knurling. The center piece was designed to accommodate a standard pinball (1-1/16" bearing,…
I made this docking station for my Garmin smart watch and Jaybird bluetooth earbuds for easy charging. The design is made for presize pressure/friction fit of the stock cable plugs so they stay in place when you dock the devices. A neat…
Card holders are designed for sleeved cards (both top and bottom). The 3 slots on the bottom tray can be used either for Johnson Nisple (+3 inventory slots) or for the keys in the “Separate Ways” game variant. The hole in the center is…
For my StepManiaX setup, I have the Logitech Z333 Speakers (actually the Z337 but it's basically the same) and the “VIVO Mobile TV Cart” for the touch monitor. I designed these mounts to hold the speakers on top of the monitor, and the…
This 3D model features a sleek and compact charging dock designed specifically for the Garmin Vivosmart Fitness Tracker. The dock provides a secure and stable platform for charging your smartwatch, ensuring it stays in place while it…
This must be printed in two pieces and glued/taped together. Do NOT recommend printing in PLA, due to warpage during use. Originally, I printed this on a Lulzbot using vase mode in Cura, which worked well.
1U Rackmount brackets for the Vivotek ND8322P PoE NVR. Designed with 3mm thick walls for durability. Does require M3 screws to attach the brackets to the NVR. Printed on the Creality Ender 3 v2 Neo. **It is not recommended to support the…
If you like it, download it. Thank you for all the support.
if you want other phone's CAD, put it down in the comments and I'll try my best to make them~
Strap for Garmin Vivoactive 3 Print Settings Printer: Prusa Mini Rafts: No Supports: No Resolution: .20 Infill: 20 Filament: SUNLU TPU Black Notes: Printed in TPU. Category: Sport & Outdoors
Migrating from thingiverse https://www.thingiverse.com/thing:4005366 Garmin vivosport watch strap holder loop ring printed in flexible material (TPU 95A) FreeCAD 0.18 file included flexible material (TPU 95A)
Fits on both my Fenix and Vivoactive Print in flex Filament Category: Accessories
The holder that kept the wristband in place snapped and I made this little thing in Fusion 360. I didn't check Thingiverse first so I see now that there are couple of other versions of this thing already. I tried to make it as small as…
The little rubber thing that holds the rest of your watch strap. If and when yours wears out and brakes, just use TPU
Inspired by https://www.thingiverse.com/thing:7102110 but totally new designed with the overhang it doesn't pop out itself, but can be removed easily when printed with flex material I printed in Geeetech TPU, other brand maybe shrink a…
I wanted a stand I could plug my vivoactive 3 into. Something a little bit decorative, but functional. There wasn't much to go on, some designs are on here and some on grabcad.com, but none of it was to my taste. So here's my version.…
This is a replacement cover for the Corsair Flash Survivor. Threads on to the original USB drive.
Lets you put an architect lamp into the top of the VIVO monitor arm pole. The dimensions may not be correct if you have a different kind of lamp than mine, but that's what the STEP file is for :) Print in a durable filament with ~5 or…
This is a replacement free loop for the Garmin Vivoactive HR. I recommend using a flexible filament such as TPU which is what I did in my case. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Filament: Doesn't Matter…
(If you make one, please upload a make! it is very much appreciated! Thank You.) Vivofit Jr replacement strap holder! Pretty self explanatory! walls are 0.8mm thick for a 2 pass print with 0.4mm nozzles. I've printed this in 0.2mm & 0.1mm…
Printed from Varioshare TPU flexi filament from Colorfabb, 0.2 mm. Attached to the case with double-sided tape.
I felt that the band retainer was a little too thick and pinched in to my wrist. Also, when printing in a less flexible material like PETG, the band retainer won't give enough to allow it to slip over the incoming strap. So I redesigned…
