Garmin Vivoactive 3 Band Retainer - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement band retainer clip for the Garmin Vivoactive3 band. May fit other Garmin bands as well.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 1
- Views
- 269
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I felt that the band retainer was a little too thick and pinched in to my wrist. Also, when printing in a less flexible material like PETG, the band retainer won't give enough to allow it to slip over the incoming strap.
So I redesigned this with a 1 mm thickness as well as reducing the band retainer hole protrusion by about 1 mm so it would also be easier to slip over the incoming band.
Lastly, I chamfered the outer perimeters of the retainer a bit to remove the sharp edges and this also is more comfortable against the skin.
Update: Added a wider retainer for older Vivoactive square face watch.