Garmin Vivoactive 3 Band Retainer - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement band retainer clip for the Garmin Vivoactive3 band. May fit other Garmin bands as well.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 269
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I felt that the band retainer was a little too thick and pinched in to my wrist. Also, when printing in a less flexible material like PETG, the band retainer won't give enough to allow it to slip over the incoming strap.
So I redesigned this with a 1 mm thickness as well as reducing the band retainer hole protrusion by about 1 mm so it would also be easier to slip over the incoming band.
Lastly, I chamfered the outer perimeters of the retainer a bit to remove the sharp edges and this also is more comfortable against the skin.
Update: Added a wider retainer for older Vivoactive square face watch.