41 modeli
This is a charging stand for the Garmin Vivoactive 4. Simply insert the original cable from the bottem and secure it in the slot. The part prints without supports. With the 0.3mm Draft profile on an MK3 it will take less than an hour.…
Hey! This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides…
This is s remix of DalbyTech's Garmin Fenix5 watch charging stand. I wanted a charging stand for my Vivoactive 3 and just added a charge cable hole to the 12 o'clock position for the charging cable using Tinkercad. Print instructions…
Based on my charging stand for Epix watches, I made this modification for Vivoactive 5 wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on the end……
The Garmin Vivoactive 4S smartwatch is smaller than version 4 and the original stand didn't fit my needs. Patrick was so kind to publish his original model as step file, so I was able to resize and redesign it a bit to fit 4S version. The…
I designed it for my garmin vivoactive 3 with closed strap, and my wife's forerunner 45s. v1.4 - only for vivoactive 3. v2.2 - for VA3 and FR45s and maybe else. v3.0 - slim version - not yet printed for VA3 and FR45s and maybe else.…
This is replacement loop to secure watch strap of Garmin Vivoactive 3. Print instructions Print with one perimeter and no infill.
My Vivoactive 3's keeper broke, and instead of buying a replacement band from Garmin, I found it quicker and easier to design and make my own. May also work with other Garmin models as well. Print instructions Filament: Fillimentum…
Charging stand for Garmin Vivoactive 6. I hate the charging port design and location on this watch because it does not rest properly on any flat surface while charging. To solve this, I created this charging stand to allow [almost]…
Two versions: one simple, the other with a small protrusion (as on original strap keeper). Use flexible material (TPU), 100% infill.
Print in place watch band for any watch with a 22mm band. The original file on thingiverse recommends 0.1 mm resolution but 0.2 worked just fine (but the 0.1 mm will probably look better). In the pictures its printed with PLA but tested…
Model A simple charging stand compatible with the Garmin Vivoactive 3 series of smartwatches. Not compatible with Garmin watches with the charger to the side instead of on top. Printing Instructions I used Hatchbox white PLA for my print…
Shorter band, and a less intrusive lock ring compared to the original. Can print on the side, but if the holes rip, better to print it flat for strength.
How to charge a Garmin Fenix (5) without charging cable? DIY, building your own cable. Designed with FreeCAD, moddels available. To charge the watch, you can use the two outer connections for charging, regardless of polarity (works in…
This is a Garmin Vivoactive 3 charging stand angled at 35 degrees with a hole to plug the charging cable in the back of the watch. The hole is located at the top. Some other charging stands have the holes in different locations so be…
Simple design, wanted to tailor it to my watch and how it felt. It's a snug fit. Printed using Ninjatek Cheetah TPU with a 0.6mm nozzle and supports.
I made this docking station for my Garmin smart watch and Jaybird bluetooth earbuds for easy charging. The design is made for presize pressure/friction fit of the stock cable plugs so they stay in place when you dock the devices. A neat…
Strap for Garmin Vivoactive 3 Print Settings Printer: Prusa Mini Rafts: No Supports: No Resolution: .20 Infill: 20 Filament: SUNLU TPU Black Notes: Printed in TPU. Category: Sport & Outdoors
Fits on both my Fenix and Vivoactive Print in flex Filament Category: Accessories
The holder that kept the wristband in place snapped and I made this little thing in Fusion 360. I didn't check Thingiverse first so I see now that there are couple of other versions of this thing already. I tried to make it as small as…
I wanted a stand I could plug my vivoactive 3 into. Something a little bit decorative, but functional. There wasn't much to go on, some designs are on here and some on grabcad.com, but none of it was to my taste. So here's my version.…
This is a replacement free loop for the Garmin Vivoactive HR. I recommend using a flexible filament such as TPU which is what I did in my case. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Filament: Doesn't Matter…
I felt that the band retainer was a little too thick and pinched in to my wrist. Also, when printing in a less flexible material like PETG, the band retainer won't give enough to allow it to slip over the incoming strap. So I redesigned…
A simple charging base for the garmin Vivoactive 3 I designed in order to prevent laying it flat on the glass screen whi
Hello, this is simple band holder repair for Garmin Vivoactive watches (maybe fits other types?). It will probably be best when printed with something flexible but even PLA works well. You just need to cut it in one of the corners with…
After bustin the edge on my bezel on my smart watch whilst out bouldering and suspecting a new bezel would take a while to get my hands on, I wanted to keep the watch going while I sorted that out and try and protect the screen from…
Printed with TPE 70A, and this works perfektly for us. Test prints with TPE 80A felt slightly uncomfortable, did not try printing with softer material. All parts were printed without supports. However, the wristband strap has a small 45°…
It's quite chunky and the edges were a bit sharp so I trimmed it after printing. Would recommend using a flexible filament, I used A95 TPU.
This is an printable bracelet for the Garmin vivoactive 3. The bracelet is 20mmm wide and you have to use the metal piec
I made this model back in the day, and uploaded to thingyverse. To my surprise the same design is still relevant on the latest Vivoactive model. My partner has a smaller wrist and finds that two loops is a better setup. Support me!…
I made a watch stand with integration of the charger for VivoActive 4S. No support is needed with correct print orientation.
I got tired of my smartwatch charging connector sliding around the nightstand and the watch ending up face-down on the cable. This dock screws to a wall (or any vertical panel) and holds the charging puck in a hole, so you just drop the…
I recommend a flexible slightly thick double sided tape. This model was designed with 1.9mm thick double sided tape (with foam core) in mind. May or may not work with 3M VHB (I can't find my roll of it… need to go buy some more) If your…
Print with TPU and attach original spring bar.
A replacement watch strap keeper for the Garmin vivoactive 3 or any other vivoactive with a 20mm band. Made in TinkerCAD, it is intended to be customisable to the strap dimensions, with care to check the internal wedge size to closely fit…
Vivoactive handlebar mount to use with or whithout charging cradle Handlebar Diameter 31,8 mm Stick a washer in the upper part for the magnet and glue the two upper parts together. Use a piece of bicycle tube on the inside of the bracket.…
30 mm handlebar mount for Garmin vivoctive 3 and 6 models, maybe some others/generic too. The top is interchangeable for different usecases: strap, no strap, clip on What you need: Three M3x5 screw inserts Three M3x8 screws for assembly…
Tree supports and PETG is ideal but anything will do
This is an upgraded version for vivoactive 4s. Assemble is simple: just glue parts together like I did:
based on the design from joynertom I am running mine printed in basic PETG since 3 months now. It works flawless so far. Printed in PETG to get the flex needed for the release mechanism. Other materials not tested yet. printed with…
This is an upgraded version for vivoactive 4s. Assemble is simple: just glue parts together like I did:
