Garmin Vivoactive3 Bike / Bicycle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,02 € – 1,25 € netto (bez VAT)
Dla pliku: I changed so that Garmin FR570 can fit / smartwatchmount_04n_02mm_pla_mk4s_54m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,13 € netto (środek widełek).
- Masa podana przez autora
- 19 g
- Czas druku podany przez autora
- 54 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Hey! This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike.
- Ocena
- 4,5 / 5
- Polubienia
- 89
- Pobrania
- 484
- Wydruki
- 2
- Wyświetlenia
- 3965
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey!
This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides nice view on the watch so you can use it as speedometer etc. and it also gives a watch some protection. It's superlight design and can be printed with ABS, PETG or PLA. The zip-tie holes are hidden, making the design even cleaner.
It fits most tapered bike handlebars. In case you need to modify it, there is also .STEP file attached.
It works really well and it's tested design with 500km+ of MTB cycling.
Best regards,
Jure Korber
Print instructions
Category: Sport & Outdoors Summary
Hey!
This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides nice view on the watch so you can use it as speedometer etc. and it also gives a watch some protection. It's superlight design and can be printed with ABS, PETG or PLA. The zip-tie holes are hidden, making the design even cleaner.
It fits most tapered bike handlebars. In case you need to modify it, there is also .STEP file attached.
It works really well and it's tested design with 500km+ of MTB cycling.
Best regards,
Jure Korber
Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 30
Notes:
4 perimeter shells, place it on the side with smaller handbar hole, use supports, but not inside zip-tie holes!
Post-Printing
This is optional post-printing process that makes your 3D print looks great!