1 / 9
Vivoactive 3 & Vivoactive 3 Music Charging Stand — zdjęcie 1
1 / 9

Vivoactive 3 & Vivoactive 3 Music Charging Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Garmin Vivoactive 3 charging stand angled at 35 degrees with a hole to plug the charging cable in the back…

Ocena
0 / 5
Polubienia
6
Pobrania
50
Wydruki
0
Wyświetlenia
311
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a Garmin Vivoactive 3 charging stand angled at 35 degrees with a hole to plug the charging cable in the back of the watch. The hole is located at the top. Some other charging stands have the holes in different locations so be careful which one you choose.

Designed on CATIA V5, native file included.

Edit: As requested, I've included the STL file for the Vivoactive 3 Music which has the hole for the charger on the left side at the 9-o'clock position.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.16

Infill:

20%

Filament: Hatchbox PLA black


Notes:

Print on its side i.e. the hole for the charging cable should be on a "vertical" surface near the print bed (as shown in photo #5).

Post-Printing =============

#1

#2

#3

#4

#5 (print in this orientation)

#6

Category: Sport & Outdoors

Tagi