Way too Sturdy Vivo Monitor Desk Mount Stand Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a way too sturdy clamp for my son's Vivo Monitor Desk Mount (https://www.amazon.com/gp/product/B009S750LA).
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 72
- Makes
- 0
- Views
- 1,034
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Made a way too sturdy clamp for my son's Vivo Monitor Desk Mount (https://www.amazon.com/gp/product/B009S750LA). He has moved from a dual monitor setup to a laptop plus external monitor setup and we wanted to re-use the monitor arm for a laptop monitor arm mount (https://www.thingiverse.com/thing:2011527).
Used this also as an exercise on how to avoid supports with PETG. Took a few tries but ended up with a design that does not need any support material on my Prusa MK3.Please make sure you print the clamp as shown in the picture!
This design is probably way too sturdy. Didn't want to risk structural failure when putting weight on the clamp due to the fact layer orientation is not ideal for something that needs to be as strong as a clamp for a laptop monitor arm mount. So far the clamp doesn't show any sign of fatigue.
Print instructions
Category: Computer Summary
Made a way too sturdy clamp for my son's Vivo Monitor Desk Mount (https://www.amazon.com/gp/product/B009S750LA). He has moved from a dual monitor setup to a laptop plus external monitor setup and we wanted to re-use the monitor arm for a laptop monitor arm mount (https://www.thingiverse.com/thing:2011527).
Used this also as an exercise on how to avoid supports with PETG. Took a few tries but ended up with a design that does not need any support material on my Prusa MK3.Please make sure you print the clamp as shown in the picture!
This design is probably way too sturdy. Didn't want to risk structural failure when putting weight on the clamp due to the fact layer orientation is not ideal for something that needs to be as strong as a clamp for a laptop monitor arm mount. So far the clamp doesn't show any sign of fatigue.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 50%
Filament: eSun PETG Orange
Notes:
Used 5 perimeters for the vertical shell.
No support needed.Please check the picture for the correct print orientation!
PETG sticks like mad on the Prusa PIE sheet so didn't use a raft. Your milage may vary.