Garmin Vivoactive 4S Charging Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.37 – €1.68 net (excluding VAT)
For file: Garmin_Vivoactive_4S_Charging_Stand_0.2mm_PLA_MINI_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.52 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A remix of charging stand from Patrick to fit smaller 4S version
- Rating
- 4.5 / 5
- Likes
- 38
- Downloads
- 348
- Makes
- 11
- Views
- 1,550
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Garmin Vivoactive 4S smartwatch is smaller than version 4 and the original stand didn't fit my needs. Patrick was so kind to publish his original model as step file, so I was able to resize and redesign it a bit to fit 4S version. The main change is a location of cable hole. I had to redesign the opening so it can be printed without supports.
The model is oriented for best printing quality and doesn't need any supports. Just be sure you have clean bed so the cable holder starts printing well.
The gcode provided uses 0,2mm layer, but you can easily print it at 0,25 or 0,3mm. I used higher layers for design iterations and the quality hasn't changed much. That way, you can print it faster if you need.
If you need to change anything, I uploaded step and f3d files too.