KitchenAid Pasta Roller Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement gear for a KitchenAid Pasta Roller (KSMPSA). If something gets jammed in the rollers, there is a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is a replacement gear for a KitchenAid Pasta Roller (KSMPSA).
If something gets jammed in the rollers, there is a brass rod that will shear as a safety feature. Because this is made from PLA, I figured it would have a lower shear force than the brass it's replacing. I've been using this in my pasta roller for months without issue.
I designed this with a 0.2mm tolerance for my printer, printed at 0.2mm layer height with 100% infill.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Generic PLA
Black
Category: Kitchen & Dining