Stained PLA Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
June's Endless PLA subscription is out now! Since 4 of the 6 filaments are transparent we have decided to make some…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 27
- Wydruki
- 2
- Wyświetlenia
- 244
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
June's Endless PLA subscription is out now! Since 4 of the 6 filaments are transparent we have decided to make some light inspired designs!
This "Stained" PLA lamp is a 3D printed take on a Stained Glass lamp!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
15-20%
Filament: Protopasta HTPLA
Notes:
-0.2mm layer height
-15-20% infill
-Supports needed for arches
-Print the base
-I used this lamp cord: Lamp Cord
-Print 32x “glass” pieces
-To print with optimal clarity:
-.1mm layer height
-2 perimeters
-avoid crossing perimeters
-100% infill
-Aligned Rectilinear fill pattern
-0 top and 0 bottom layers
-Slow all speed to 20mm/s
-Print at a higher temp for PLA, I used 220 for mine
-Print on a smooth sheet or glass bed for best clarity
-I used the “print by object” setting and filled the bed with copies for the transparent rainbow filament