Stained PLA Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
June's Endless PLA subscription is out now! Since 4 of the 6 filaments are transparent we have decided to make some…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 27
- Makes
- 2
- Views
- 244
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
June's Endless PLA subscription is out now! Since 4 of the 6 filaments are transparent we have decided to make some light inspired designs!
This "Stained" PLA lamp is a 3D printed take on a Stained Glass lamp!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
15-20%
Filament: Protopasta HTPLA
Notes:
-0.2mm layer height
-15-20% infill
-Supports needed for arches
-Print the base
-I used this lamp cord: Lamp Cord
-Print 32x “glass” pieces
-To print with optimal clarity:
-.1mm layer height
-2 perimeters
-avoid crossing perimeters
-100% infill
-Aligned Rectilinear fill pattern
-0 top and 0 bottom layers
-Slow all speed to 20mm/s
-Print at a higher temp for PLA, I used 220 for mine
-Print on a smooth sheet or glass bed for best clarity
-I used the “print by object” setting and filled the bed with copies for the transparent rainbow filament