Fan Bracket - Cooler Master GeminII M4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple fan bracket for the CoolerMaster GeminII M4 that is compatible with any 120mm fan
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a replacement fan bracket for the CoolerMaster GeminII M4 CPU cooler. I lost the original metal clips, which never seemed to secure the fan well anyway. This bracket securely mounts the fan to the cooler and should help direct more airflow along the edges back into the fin stack.
Compatibility: While designed for the CoolerMaster GeminII M4, this bracket might also fit other similar CPU coolers with some adjustments.
Assembly Instructions: I used heat set inserts on the stock fan (M3 D4.6mm L3.0mm) and four M3x10 SCHS screws. You should be able to use nuts and any type of M3 screw as long as it secures the fan in place. The notches along the bracket should slot into where the original brackets were.
Print Settings: It's designed to be printed without supports, on the flattest side. I recommend a layer height of 0.2mm, 30% infill, and 4 perimeters. The screw holes have been modified so that your slicer should automatically bridge them.
Material Recommendations: The bracket should be printed with a more temperature-resistant plastic, at least PETG, due to the heat generated by the CPU cooler. I printed mine from ASA for its superior heat resistance.
PSA: Ensure the screws are tight enough, or use locking nuts. If they come loose and fall into the motherboard, they could damage components.