1 / 1
Trumpet Lyre - Adapter for straight shaft lyre
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My trumpet didn't have a good receptacle for a lyre, so I made one.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Be sure to print in this orientation

Attach it to your horn at the 3rd-valve slide and rest the other side where the lead pipe enters the 3rd valve.
I've also added a set screw hole for an M3 screw.
The *.f3d file is attached - please remix!