1 / 1
Dell U4025QW curved monitor LAGERGÅNG holder — zdjęcie 1

Dell U4025QW curved monitor LAGERGÅNG holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

hold the lamp without using so much space in the back

Ocena
0 / 5
Polubienia
5
Pobrania
72
Wydruki
0
Wyświetlenia
563
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Use some double sided tape to put the ikea lamp on your curved monitor (R1500 but might work for others as well). I made this so I had space for my laptop there. See my other models.

You need 2x 8mm diameter magnets (3mm thick) to hold it in place. With these the lamp is not adjustable anymore in angle. The magnets in the lamp and in the holder pull so strong at each other, that it always goes back to the middle position. Did not think of this problem, but it is ok for me because the angle is good. YMMV.

Check out my lagergang shade to protect your eyes.

Print on the side with brim and tree support.

Tagi