1 / 2
Clamp on Vice- Fully 3D Printed by MuskokaResearch — zdjęcie 1
1 / 2

Clamp on Vice- Fully 3D Printed by MuskokaResearch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a sturdy vice which is designed to be clamped onto a desk or table.

Ocena
4,833 / 5
Polubienia
1269
Pobrania
3395
Wydruki
13
Wyświetlenia
16 368
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Summary

This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE

Additional Parts:
3x Retaining Clip.stl
2x Guide Rod A.stl
2x Grip.stl

Assembly (See Pictures):

  1. Adhere Frame Base Pad TPU to Frame.
  2. Install Grip TPU to Frame and Vise via dovetail slots.
  3. Partially thread in Mounting Bolt.
  4. Thread Mount Plate TPU onto Mounting Bolt.
  5. Mount the vise to a benchtop to complete the following steps.
  6. Feed both guide rods through the Frame and Vise.
  7. Attach one Retaining Clip to the grooved sections at the base of each guide rod.
  8. Install Threaded Rod all the way through the Frame and Vise.
  9. Attach the final Retaining Clip to the end of the Threaded Rod.

Tagi