Mola Mola (Sunfish) - String art display (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
String art of a Mola Mola (sunfish).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing Information:
- Print on its side with a 0.2 layer height
- Use regular supports for the frame and the sunfish body but apply a no-supports modifier to the strings:
- A wider than usual (>0.2mm) support-model gap is recommended since the body sticks really well to the supports.
- A 3mf file for bambu studio is provided with everything already setup but it's totally feasible with the step and stl file as well.
- Scaling the model up won't work since the strings have to be the correct diameter to work
The layer marks are more visible at the small size, but if you want to experiment with string art the tiny model is ideal. Otherwise, you have a bigger version available.
This model uses the “MolaMola No Base w Pupils.stl” from the original model. I began by reducing the number of triangles in it by using blender and a degenerate 0.1 modifier.
I provided the degenerated stl as well as the fusion360 would you want to see how it was made/modify it, … .
This technique was inspired by the work of Raskal with his string art airplanes (ex: https://www.printables.com/fr/model/890868-f-22-raptor-string-art-display-side)
---
Erratum (04/06/24) addition of a bigger model