1 / 3
Mola Mola (Sunfish) - String art display (fusion360) — image 1
1 / 3

Mola Mola (Sunfish) - String art display (fusion360)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

String art of a Mola Mola (sunfish).

Rating
0 / 5
Likes
6
Downloads
29
Makes
0
Views
218
Reviews
0

Updated at source:

Model information

Category
Sculptures
License
Creative Commons — Attribution — Noncommercial — Share Alike

Printing Information:

  • Print on its side with a 0.2 layer height
  • Use regular supports for the frame and the sunfish body but apply a no-supports modifier to the strings:
  • A wider than usual (>0.2mm) support-model gap is recommended since the body sticks really well to the supports.
  • A 3mf file for bambu studio is provided with everything already setup but it's totally  feasible with the step and stl file as well.
  • Scaling the model up won't work since the strings have to be the correct diameter to work

 

The layer marks are more visible at the small size, but if you want to experiment with string art the tiny model is ideal. Otherwise, you have a bigger version available.

 

This model uses the “MolaMola No Base w Pupils.stl” from the original model. I began by reducing the number of triangles in it by using blender and a degenerate 0.1 modifier.

I provided the degenerated stl as well as the fusion360 would you want to see how it was made/modify it, … .

 

This technique was inspired by the work of Raskal with his string art airplanes (ex: https://www.printables.com/fr/model/890868-f-22-raptor-string-art-display-side)

 

---

Erratum (04/06/24) addition of a bigger model

Tags