Gel Blaster Bottle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a gel blaster thread adapter that was strong enough to withstand use in battle so I remixed a design…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 480
- Wydruki
- 1
- Wyświetlenia
- 1876
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
I couldn't find a gel blaster thread adapter that was strong enough to withstand use in battle so I remixed a design by And219y and reinforced it to be a bit stronger. I still highly recommend using a strong material like ABS, ASA, PA, PC, or any alternatives the ensure the adapter doesn't snap and printing at 100% infill is a must. I printed it with the wider end facing down and it seemed to print well with no supports although a brim might be necessary. I've only tested this design on 2L bottles so far but should work on any bottles with the same thread.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
100%
Filament: Elegoo ASA
Black
Category: Toys & Games