Convertible Keychron K1 Cover Case + Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-piece cover for the Keychron K1. When inverted, it props the keyboard up and is held in place by its rubber feet.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a keyboard case + stand for the Keychron K1. The nub that locks the two pieces together are a little loose, but still works.
In stand-mode, the K1's rubber feet hold them nicely in place via friction.
The cover doesn't hold tightly, so it is not recommended for carrying around. However, it does protect the keys when transporting in a bag.
Note: The little clips at the side could use some shaving down with a penknife on the underside, to prevent them leaving marks on the plastic sides of your keyboard. The extent of shaving depends on your print settings and the corner expansions.