1 / 3
GMC under dash panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed as a panel that could be installed under the dash for a 2023 GMC, to add a inverter control panel to.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was created to add a inverter controller to a panel under the dash of a GMC 2500HD 2023. Files as included for the hole cut out for the controller and one without a hole so that custom holes could be for other accessories. this was originally printed with bambulabs x1c but was also printed using Creality CR10x, all using PLA but would be better with ASA. The back of the model is open for wiring run from the dash and can be installed using double stick tape.