Ikea ALEX Storage System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular grid-based storage system consisting of custom storage bins and grid base plates for your Ikea ALEX drawer.
- Ocena
- 4,8 / 5
- Polubienia
- 175
- Pobrania
- 433
- Wydruki
- 3
- Wyświetlenia
- 3861
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
The beauty of 3D printing is that it allows for an incredible amount of customization. Browsing the internet, I could not find a storage solution that would fit my needs. Sometimes the storage containers would be too deep, too narrow or difficult to pick hardware up from. Thus, I designed this storage system for my ALEX drawers. Hope this system might help you too!
Recommended Print Parameters:
- ≥0.2mm layer height
- 20% infill
- 3 vertical walls
- 3 top and bottom layers
*I used double-sided tape to stick the base plates to the bottom of the drawer.
Do suggest any improvements or new storage bin designs in the comments section. I would love to expand the variety of storage bin designs. Happy printing and thank you for downloading my model!