1 / 2
DIY miniature Guillotine kit card model (Tweaked - friendly tolerances.) — zdjęcie 1
1 / 2

DIY miniature Guillotine kit card model (Tweaked - friendly tolerances.)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed by @Severeon, this is a tiny printable guillotine kit card. (With slightly modified parts for easier printing).

Ocena
5 / 5
Polubienia
122
Pobrania
407
Wydruki
2
Wyświetlenia
1714
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really enjoyed the original model by Severeon, 

and I wanted to print it for a friend. However, I found it a little difficult to assemble without my tools (I'm just not sure what tools this friend has available to them), and I didn't wanna risk them breaking the parts while trying to assemble it.

So, I tried just redesigning it to fix some of the issues I had to clean up to build it myself.

 

Note that this model still has fairly tight tolerances for a friction fit. You should still use any of your normal “x/y offset” settings in your slicer, and you may still need clean up any spots where there're obvious print artifacts.

 

In order to get a satisfying “drop” of the blade, I recommend printing the blade fairly solid (or adding weight!) and/or adding a tiny amount of lubricant to the sliding portion, if you have it :)

 

## The print in the photo:

For the print in the photo, I used “Kexcelled” brand dark wood PLA filament, with a 0.4mm nozzle and 0.1mm layer height, and with ironing.

For the blade I used Eryone 2 color silk PLA (for an iridescent effect).

My blade was kinda light. So, to get it to drop nicely, I had to add a tiny amount of silicone lubricant to the wood slides.

Tagi