DIY miniature Guillotine kit card model (Tweaked - friendly tolerances.)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed by @Severeon, this is a tiny printable guillotine kit card. (With slightly modified parts for easier printing).
- Rating
- 5 / 5
- Likes
- 123
- Downloads
- 410
- Makes
- 2
- Views
- 1,723
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really enjoyed the original model by Severeon,
and I wanted to print it for a friend. However, I found it a little difficult to assemble without my tools (I'm just not sure what tools this friend has available to them), and I didn't wanna risk them breaking the parts while trying to assemble it.
So, I tried just redesigning it to fix some of the issues I had to clean up to build it myself.
Note that this model still has fairly tight tolerances for a friction fit. You should still use any of your normal “x/y offset” settings in your slicer, and you may still need clean up any spots where there're obvious print artifacts.
In order to get a satisfying “drop” of the blade, I recommend printing the blade fairly solid (or adding weight!) and/or adding a tiny amount of lubricant to the sliding portion, if you have it :)
## The print in the photo:
For the print in the photo, I used “Kexcelled” brand dark wood PLA filament, with a 0.4mm nozzle and 0.1mm layer height, and with ironing.
For the blade I used Eryone 2 color silk PLA (for an iridescent effect).
My blade was kinda light. So, to get it to drop nicely, I had to add a tiny amount of silicone lubricant to the wood slides.