1 / 4
IKEA Alex Snap-Fit Handle — zdjęcie 1
1 / 4

IKEA Alex Snap-Fit Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Revised IKEA ALEX Handle by @Whity with tighter tolerances allowing for a "snap-on" fit without screws or glue.

Ocena
4,714 / 5
Polubienia
207
Pobrania
602
Wydruki
11
Wyświetlenia
3705
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is another remix of @Whity's awesome IKEA ALEX Handle.

I wasn't thrilled with screwing in handles, so I modified the design such that the insert was small enough to simply “snap” into place without the need for screws OR glue/tape. This version I found to be the sweet spot for balancing a tight fit while retaining the ability to pop them out without damaging the drawer's finish.

Note: I have heard that some newer versions of the Alex have a different cutout profile for the handle. With that said, these are confirmed to work on my three Alex drawer units that were purchased in March '22 under the article number 604.735.48.

Tagi