WeCreat Rotary extension for thumb screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WeCreat Rotary extension for thumb screw
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
When installing the rotary on the wecreat laser it can be difficult to get to the screws. It is in such a tight area that the thumb screw heads will rub if you just try to replace the screws. I made these extensions where you could use 40 millimeter thumb screws and the head. would be up out of the way where they would not rub on the aluminum extrusion. The threads are M4 x 0.7. Below is a link of the ones that I used from Amazon. I designed these so that they are a perfect fit and will snugly slide onto the rotary and stay in place so that they don't fall when trying to set the rotary in place. Depending on how well your printer is tuned These should fit perfectly. If they are too tight, you could. always scale up 1/2 a percent.
Thumb Screws 4x0.7x40
https://amzn.to/4aTeOI6