1 / 4
WeCreat Rotary extension for thumb screw — image 1
1 / 4

WeCreat Rotary extension for thumb screw

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

WeCreat Rotary extension for thumb screw

Rating
5 / 5
Likes
17
Downloads
101
Makes
0
Views
612
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

When installing the rotary on the wecreat laser it can be difficult to get to the screws. It is in such a tight area that the thumb screw heads will rub if you just try to replace the screws. I made these extensions where you could use 40 millimeter thumb screws and the head. would be up out of the way where they would not rub on the aluminum extrusion. The threads are  M4 x 0.7. Below is a link of the ones that I used from Amazon. I designed these so that they are a perfect fit and will snugly slide onto the rotary and stay in place so that they don't fall when trying to set the rotary in place. Depending on how well your printer is tuned These should fit perfectly. If they are too tight, you could. always scale up 1/2 a percent.

Thumb Screws 4x0.7x40

https://amzn.to/4aTeOI6