DJI Avata Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "closed" guard rail for the DJI Avata - (Soft impact - indoor).
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 332
- Wydruki
- 0
- Wyświetlenia
- 2041
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a "closed" guard rail for the DJI Avata - which I made in 2022.
Recommended for close proximity flying.
Weight: All corners: 28 g (4x7g)
Front only: 14 g (2x7g)
Recommended material: Flex (tested: Flexfill TPU 98A, Filaflex40) the softer material the better I would think...
Infill: 0%
I printed it with no infill.
Brim: It is recommended to use Brim (3mm).
But I been printing the guard rails without brim with no problems...
Support build in file ("green legs"). 
Support can be a bit difficult to remove without a utility knife or side cutter when printing with flex material.
If using the single guard rail files (stl or 3mf) remember to mirror 1 sample and to rotate them (just saying).
o7