1 / 5
Transmitter Mount for Bass Guitar Strap (Ver. 3) — zdjęcie 1
1 / 5

Transmitter Mount for Bass Guitar Strap (Ver. 3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wireless transmitter mount for a bass guitar that has a hinged lid.

Ocena
0 / 5
Polubienia
9
Pobrania
32
Wydruki
0
Wyświetlenia
208
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

Designed a third version of the bass guitar transmitter mount that has a hinged lid. To attach the lid I used a piece of M3 all-thread, cut to length, cut a notch in the end, and used a drill on low speed to screw it in. The lid snaps closed and is very secure. I've changed the design to be structurely stronger in all ways to prevent breaking if dropped. This mount will hold a transmitter that is 96(L) x 72.2(W) x 30(H). I recommend printing in PETG, ABS, ASA or any material used for functional parts with high tensile strength. 

Tagi