Blitzer Beetle Brushless Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts for changing the standard brushed 540 motor to a brushless motor in your Tamiya Blitzer Beetle.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The original Blitzer Beetle is built for a standard 540 brushed motor. Chaning the motor is no problem, but there is no space for the bigger brushless ESC. With these parts you can easily change the brushed motor to a brushless one without loosing space for the LiPo accu. I am using a 2S 5400 LiPo. You might have some space between the bracket and the Lipo while using a smaller one. Some foam should help here.
Hope you can see on the pictures where the printed parts go.
Parts additional needed:
- 2x M3x6 DIN912 Screws (to mount the bracket mount)
- 3x M3 Nuts (2x for bracket mount, 1x for the receiver mount)
- 1x M3x18 DIN933 Hex Screw (for the Thumb Srew)
I am using a F540 3300KV brushless motor and a 45A ESC.