HSW removable Buckets/Boxes (round)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
buckets for HSW in different sizes.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 285
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are buckets for the honeycomb storage wall. (There is also a square version) Just print the bucket with the same size holder. BTW the render was my first in FreeCAD so dont judge me.
My recommended print settings:
* 0.4mm nozzle
* 3 walls
* 0.2mm layer height
* 20% infill
* 200 mm/s
* supports: you probably dont need supports as all overhangs are not over 45°.
The 5cm and 8cm Holder dont render right. I dont know why but you can still print them normally.
I also made some other versions. Check them out before printing. You might like them better: HSW detachable Buckets/Boxes (round), HSW detachable Buckets/Boxes (square).
Happy printing!