HSW removable Buckets/Boxes (round)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
buckets for HSW in different sizes.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 71
- Makes
- 1
- Views
- 285
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are buckets for the honeycomb storage wall. (There is also a square version) Just print the bucket with the same size holder. BTW the render was my first in FreeCAD so dont judge me.
My recommended print settings:
* 0.4mm nozzle
* 3 walls
* 0.2mm layer height
* 20% infill
* 200 mm/s
* supports: you probably dont need supports as all overhangs are not over 45°.
The 5cm and 8cm Holder dont render right. I dont know why but you can still print them normally.
I also made some other versions. Check them out before printing. You might like them better: HSW detachable Buckets/Boxes (round), HSW detachable Buckets/Boxes (square).
Happy printing!