1 / 8
Dual Ocarina stand for Soprano C and Alto C ocarina designed by E.C.3D — zdjęcie 1
1 / 8

Dual Ocarina stand for Soprano C and Alto C ocarina designed by E.C.3D

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Make sure to print upside-down. (letter side down)

Ocena
5 / 5
Polubienia
14
Pobrania
78
Wydruki
1
Wyświetlenia
1066
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dual Ocarina stand for Soprano C and Alto C ocarina designed by E.C.3D

https://www.printables.com/model/845214-ocarina-sc

https://www.printables.com/model/474058-ocarina-of-time-12-hole-alto-c-ocarina

 

I've printed many ocarinas here, but E.C.3D's design is the best. So I made a stand for E.C.3D's Soprano C ocarina and Alto C ocarina.  

This stand only fits 

oc_oot_12h-ac_Version-3_no_triforce.stl

and  

oc_sopranoc_clean.stl

I designed this stand to make a great gift to friends. 

 

I HIGHLY RECOMMEND printing this upside-down, so that the lettering side is the initial layer. As you can see on my last two photos (failure prints), letterings will become blurry if its the top layer.

 

I printed with PLA, 0.3/0.6mm, with support, 2 walls, 3 top and bottom layers, 25% lightening infill. I also printed with white PETG, but I guess flat white PLA looks better. USE lightening infill to save filament and printing time.

Tagi