Swiss Army Tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on a meme
- Ocena
- 4,667 / 5
- Polubienia
- 514
- Pobrania
- 697
- Wydruki
- 2
- Wyświetlenia
- 7363
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
A little update
If the cannons are too loose or don't stay in place
insert a toothpick in the gap shown in the image and break its tip there.
I swear it is by design and not something i discovered by accident.
----------------------------------------------------------------------------------
A project no one wanted or asked for .
Recreated from a meme.
This monstrosity is 230 mm in length fully extended , 93 mm wide and 80 mm high.
To be honest i wouldn't like meet this thing on the battlefield in WW2 this thing is terrifying. Its bold colors just show that it doesn't need camouflage, it's scared of nothing .
General Info
- Assembly guide Included
- No need for multi color printer , everything is color separated.
- Guns and tank tracks are connected using filament.
- Included filament cutting jig to cut filament for track links
Functionality and Features
- Fully articulated .
- Wheels spin freely , and tracks spin with them.
- Tracks have some resistance but it can be driven on non smooth surface
Printing info
- Almost all the components except Latch, Cover is printed at 0.2 layer height 0.4 nozzle.
- Printing settings are set in 3mf files , but please change filament and a printer settings to your printer.
- PLA + or PETG needed for wheel pins and turret base, regular PLA may break while insuring them into wheels
Assembly Notes
- Wheels pins may be tricky to connect to wheels , some force needs to be applied . Same goes to turret base.
Happy 3d printing