1 / 2
Soda can opener with magnet hole - with option to use as lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the great original model with an added 6x2mm magnet hole
- Ocena
- 4,8 / 5
- Polubienia
- 67
- Pobrania
- 785
- Wydruki
- 7
- Wyświetlenia
- 3067
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 8)Remiksy (0)Kolekcje (97)Powiązane
Added a magnet hole, 6mm diameter, 2mm depth. The hole is not fully 2mm so magnet will be a bit above the surface, but still it is staying firm on the fridge, so it will be always close to your cans.
With a drop of super glue you can insert the magnet permanently.
Fun fact: did you know that 30%+ citric acid water solvent can wash off superglue from your fingers in 10 minutes?
Please give a like to the original model.