Turntable Product / Plaque Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand designed to sit on a small turntable and prop up stuff for picture taking
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A stand I designed for my turntable to allow it to hold up products vertically, such as my wall art plaques I make.
It should fit any turntable with a diameter at or bigger than 135mm.
This file contains both .stp and .stl formats.
V2:
- Changed the end peg height by 12mm. I had forgotten to test my other plaque on it and found it was too short.
Suggested Print Settings: (What my product pictures show)
- 0.4mm Nozzle
- 0.20mm Layer Height
- 30% Infill
- I set my slice to auto tree suppot and it put supports under the crest and underneath the front limbs, long with the curve of the limbs at the front
Turnaround: https://youtube.com/shorts/CJuJf96AdRk
DO NOT resell/sell it by itself
DO NOT redistribute this asset freely, please simply redirect them to this page
DO credit me if you use it
Print Settings
Rafts:
No
Supports:
Yes
Infill:
30%
Filament: Any PLA Any
Notes:
Set supports for the front arms, both at the front and back, and middle arch.
Post-Printing =============
Removing supports
You will have to remove tree supports or any supports you set on your print.
Category: 3D Printing