Brand of Sacrifice Wall Plaque
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brand of Sacrifice symbol from Berserk
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this wall hanger of the Brand of Sacrifice from Berserk so you can hang it on the wall as such. It is a pretty simple print, but I ironed the top surface of mine so I used brims. If you do not iron the surface, you do not need any brims whatsoever.
Keyhole Major Diam (Screw Head): 6.95mm
Keyhole Minor Diam (Screw Threads): 3.70mm
Base Dimensions:
L: 125mm
W: 12mm (Thickness)
H: 121.5mm
Turntable: https://youtube.com/shorts/Mt5cl6AfyXI
DO NOT resell/sell it by itself
DO NOT redistribute this asset freely, please simply redirect them to this page
DO credit me if you use it
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Infill:
8%, Honeycomb
Filament: Any PLA Any
Notes:
If Ironing:
Top Surface, 30mm/s, 10% flow, 0.15mm spacing
Brim: 3mm (Outer only)
Category: Signs & Logos