Liczymy pasujące modele…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
UPDATE 9/8/22: Better tolerances on all assembly pieces Back button made thicker to avoid transparency with lighter color filaments Main body without money clip version added This popular wallet model is now available to assemble after…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
Remix for the infamous Cascade card wallet that holds up to six cards. Print as aligned. Thanks to Hugo for making the original design! UPDATE 09/12: Added version with the money clip Happy printing! NK
This is a Remix of the tree stump model by Robagon here: https://www.printables.com/prints/12116-stump-for-gloomhaven and the Pinecone by jjp12383 here: https://www.thingiverse.com/thing:3076993 These are fun little upgraded tokens for…
An assemble after printing version of the print-in-place Cascade Wallet v2, to allow for multi color or multi material components. Like the original, the shell is printed upright The handle can be printed on end or on edge with supports…
** The SNRT BOX ** This is a box with an integrated straw designed for storing powdery substances and crystals. - Keeps your materials secure and ready for use on the go. - Allows for 3 lines on the go. - Features an extra large and deep…
This is a remix of the "Cascadia Organizer" board game insert by Aaron. - Thinned the walls on the bag tray and added a logo deboss - added a snap-fit box for the pinecones with a logo deboss (or optionally a different coloured inlay…
PLA / 0.3- or 0.4-mm layer height / 2 perimeters /15% Gyroid In-fill /No Supports Recommend staggering seams to increase strength Note: On 11/20/25 added a slotted version of the “Pull” that can be pressed into place. This makes…
UPDATE 8/10/2025: strengthened wings This is a reverse-engineered remix of popular “Cascade card wallet V2” by @Hugo. My version is slimmer (7.7 mm vs 11.5 mm), but fits only 3 cards. It also incorporates spring placement from…
Who needs Ridge! 😉 This is a remix/remake of the Cascade Card Wallet with an insert for an Airtag. The body has been fully recreated with the expanding slots (used to hold the cards in place) moved to the sides. There is an additional…
Printing : I recommend printing in PETG (PLA tends to lose the tension with the cards over time) Nozzle : 0.4mm layer height : 0.2mm no support Print the model upright
The cascade card wallet is great and It's the one I use but overtime cards always start to fall. I added two 0.5mm tiles on the inner side that add extra friction for the card to not slip away and fall. It works good. You need to…
I noticed after printing the original v2 model in PLA that the cards in the first few slots would not easily extend from the wallet, while the back cards came out too easily. To correct this, I changed the orientation of one corner so…
Loved the functionality of this wallet, just wanted to add a little more flair to it so added tree and mountain designs
Modifying my computer for use as a server required installing more hard drives. The original case frame had space for only two drives. Thanks to these frames, multiple drives can be mounted. The assembly set includes one base and two…
Organizer inserts for Cascadia base game + Landmarks expansion. Landmarks expansion is not pictured above, but the organizer does fit everything from the expansion. STL and STEP files included. Wall thicknesses are all .064 inches, or…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
The lid has two latches on the top to keep the lid from bending outward. The cards keep the lid closed. I have been using it daily sinds July 2023. I tend to not leave my home with coins in the compartment because it rattles a lot, but it…
I designed a box insert for Cascadia with Landmarks. The first part holds all the starting tiles, the Landmarks scoring cards, the base Wildlife scoring cards, and both scoring sheets. Printed in PLA, no supports. The second part holds…
Stackable clothes hanger connection hooks can be used to hang on one clothes rack to connect the next.
If the Shenron model wasn’t majestic enough for you… get ready to take it to the next level! 🐉✨ This adapter transforms Shenron’s head into a cascading incense holder, letting the smoke flow from his mouth like a mystical stream,…
A nice little tray to hold the hexagonal habitat tiles and the wildlife tokens during the game, to keep game play nice and tidy
Who doesn't know it: you lay out your hex fields neatly ... and then someone bumps into the table and everything is in disorder. With this hex field grid, that can no longer happen with Cascadia. Simply place the triple hex in the middle…
Has a way better money clip and keeps your money secure.
This is not the first organizer for Cascadia but I wanted a design that works with tjdesign's excellent pinecone tokens and tree stump , so, here it is. Sized for sleeved (Mayday MDG-7100 70 x 120mm Premium) or unsleeved cards. Update Oct…
I really liked the original version of this wallet and printed it out a few weeks ago but I found that I really only needed 5 cards and I needed a place to store my Tile tracker card so I added a drawer on the back. Some other…
I made an organizer to hold Cascadia (Kickstarter edition). There's a lot of empty space in the box, so it's not the most efficient layout ever. There's no lid lift in this version, and it holds sleeved cards. My Fusion360 file is…
Lo imprimi en mi Ender 3 v2 modificada a 70mm/s con 3 paredes, con boquilla 0.4 y soportes arbol. Las paredes tienen habilitada la opcion: Forro difuso Grosor 0.5 Densidad 1.25 Distancia de punto 0.8 I printed it on my Ender 3 v2 modified…
This is a combination of the Assemble after Print - Cascade Card Wallet Remix by @815design , and the Cascade card wallet - 6 Card Remix by @NilsKal , both of which are remixes of the Cascade card wallet by @hugo See original projects for…
Remix for landmarkd and nature token boxes
Cascading AirTag MagSafe wallet with glides for easier sliding actions. Great for fidgeting too :) MagSafe ring like this one
I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…
¡Conoce a DinoCute , el tierno bebé dinosaurio recién salido de su cascarón! Este modelo 3D detallado y encantador es perfecto para fans de los dinos y coleccionistas de figuras adorables. Su diseño es ideal tanto para impresión en resina…
This is a box insert for Cascadia designed to keep all the components organised in the box and make setup faster. I remixed gexgecko's insert to reduce the amount of material required and incorporated the idea of Corey's tile counting jig…
Printed the shell with 0.32 layer height without support. 0.2 layer height for the lever mechanism. not my design, just minor adjustments for my needs. Enjoy!
This project start from a necesity of my wife. She is a teacher, she has a little student that cant see. So she need to different object to feel. So I found this file, https://www.printables.com/es/model/514261-coconut-shell Thanks to…
Cascade for intex pool ultra frame (adaptable for other pools, nozzle diameter 22mm). You can easily turn it or place it downwards to direct the flow of water where you want it.
Important • Model has zero tolerance, I wanted to avoid use of glue or screws so that it's very easy to put together (you might have to use pliers or something similar). • Make sure to set up wall ordering outside to inside , so far I…
Karo Cascade Planter with Hidden Drip Tray … is a modern, geometric planter featuring a stepped karo design. Its built-in hidden drip tray ensures proper drainage while maintaining a clean look. Optimized for 3D printing, it prints easily…
A remix from pinecone led light cover so that it is not hollow on the bottom If you need this for the board game 'Cascadia' then you have to print 25 in total to replace the original pieces. Also I printed mine to big at a manualy…
The main wallet body can be printed in your preferred material e.g. PLA but ASA or PETG is recommended. The side springs and money retention springs should be printed sideways and in a flexible material (ASA works best). The other parts…
Minis for Cascadia ( https://boardgamegeek.com/boardgame/295947/cascadia ). Use the tokens to draw from bag, but place mini on hex card, discard the animal token (don't put back in bag). I printed mine at 0.08mm layer height. Although…
Improved tree stump box for CASCADIA with magnets to hold the lid better. You can use 3x3/3x5mm round magnets. If you like it please do not forget to give tjdesign a like, too. THX. Material: PLA Layerheight: 0.2mm Infill: 15%
Cascadia organizer Remix with tree stump and nice pine cones
Easy to assemble, can hold 8 standard size cards, alternate models for more cards soon. fits into nearly any pocket. print file included, this worked for me and I just used a little super glue to secure it better. place the slider into…
★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 🧡PRINTABLES→ COLLECTIONS 💚MAKERWORLD→…
The model that is used here is the one with 6 cards and a place for cash. But also I have provided only the loop and you can scale it to every stl you want. Just use the prusa slicer in order to do that. Print with 0.2 layer height.
Overview This is an organizer/insert for the board game Cascadia. All of the components for the base game and the Landmarks expansion have a place, even for cards that are sleeved. Additionally, I enjoy using this 3d printed stump with…
Cascade Wallet V2 With Lanyard or Keychain Loop My sister needed a holder for her children's Yoto cards. This is the same great Cascade Wallet V2 by @Hugo with the simple twist of adding a small hole to hang it on a lanyard without…
Made this wallet with a couple designs that were severely modified to get what I was looking for. Made to print and assemble so you can have multiple colors. Made design with base as when I tried printing my first cascade wallet, I could…
Boba Drink Cascading Fidget Bring your favorite bubble tea to your desk with this satisfying Boba Drink Cascading Fidget! Inspired by a classic matcha boba, this articulated print twists, flows, and cascades through your fingers, creating…
water foutain. simply apply basic pipe 8mm dim. inside and water pump
UPDATE 2026/07/02: Consider this instead: I find the original a bit tight/tough to dispense all cards in the stack, also there's not enough space to identify and pick a card. My solution, dispense half the stack on one side. I have to…
First I created a slide-in tray in which two coins fit on top of each other. please note that you might want to put some tape on the back to create more friction so that the tray does not fall out due to the weight of the coins. Then I…
This is a HOn30 Bellevue and Cascade stockcar. Frame uses Microtrains 1015 couplers. Trucks use any Microtrains axle length (.540") 36" wheels. Category: Hobby
A simple tile dispenser for Cascadia tiles. The only part you need to buy is a cheap $1 pack of rubber hair ties at any Walmart. The packs usually come with 3 sizes of bands, I used the larger of the 3. I've tested the Cascadia tiles…
These are a set of tile holders for the awesome game “CASCADIA” from FLATOUT GAMES . It is a great game and I highly recommend it! The age rating on the box is 10+ but it is very inclusive to children younger than that. So why do you need…
There are quite some cascadia organizers available, but I didn't find one where I liked all the parts. So I took the parts I liked and edited them a bit to make them more immersive. Also made parts myself like the grass where the tree…
A cash “credit card mold” that fits into the cascade wallet with 3 card spaces to spare. The walls are pretty thin so be careful. Try not to fit too many bills. I'd advise printing with a large brim (like the pictures show in my slicer)…
Here is my video explaining the process of making such wall arts:
Credit card wallet with flip up mechanism for STRONG people. You can do the party trick with this using hand muscles. Gently break movement free after printing:
REV2: Cascade for intex pool ultra frame (adaptable for other pools, nozzle diameter 22mm). You can easily turn it or place it downwards to direct the flow of water where you want it.
This remix is based on the original Cascade Wallet design but optimised for a more minimalist profile. Capacity: 3 cards (instead of 5) Same mechanism: Smooth cascading action for quick access Great for minimalists: Perfect for people who…
If you want to collect rainwater, but don't want to have huge barrel under your gutter, this is solution for you! Instead of throwing empty PET bottle to sorted plastic waste (where else would you throw plastics) you can use this 4funnel…
I was asked if I could design and print a cascade bouquet holder for a wedding, so I designed this first version that in the end didn't got used. It was only tested before I got to design the second version of it (also on my account).…
I had some Cards falling out of my wallet so I added this safety clip. Flip it up and there's no way for cards to fall out and flip it down to use the wallet. I also added a loop for a keychain. The safety clip can be printet without any…
While the Cascade Wallet works great I found that the bills would sometimes slip out of the money clip when in my pocket. I added a corner hook that holds the bills in the wallet tighter but still allows them to be inserted easily. Works…
The model shown in the photograph was printed and then post-processed. The post-processing involved first applying a layer of inexpensive epoxy adhesive, sanding, applying a spray primer for plastics, sanding again, and finally two coats…
Been on wanting some Berserk props, so modeled this up. Takes a .25 in dowl through the center. Split for smaller printers. Category: Props
After looking at every cascade wallet model around, none met my needs. So I made a new one. This one holds 4 cards and has a pocket on the back for non-rigid cards/papers (insurance, cash, etc.). Print standing (stl and step should import…
If you want to upgrade you copy of Cascadia with pine cone that doesn't roll on the table this is the file for you. I printed in 0.24mm layer
A stump storage container to hold pinecones for the board game Cascadia was posted on Printables by tjdesign. I wanted the core of the tree stump to be visually distinct from the bark, so I separated the lid into two pieces that can be…
I just remixed this awesome wallet design to have a honeycomb face. You can either print the inlay and glue it in or just color it with some paint. Prints ok and works, I have not done an inlay yet the texture is nice with or without.
Hexagon Cascade Planter with Hidden Drip Tray … is a modern, geometric planter featuring a stepped hexagonal design. Its built-in hidden drip tray ensures proper drainage while maintaining a clean look. Optimized for 3D printing, it…
with bigger money clip + details
The hex tile holder has a full magnetic top as well as covers for 2 player and 3 player games. For a 2 player game, simply pop the 2 player magnetic cover on 2 of the short stacks and you're ready to play. Use the 3 player cover on a…
Print Details Model has been optimized to print with a .6mm nozzle and .2 layers. No supports are needed. .2 layers with 100% infill (for strength) takes about 35 minutes and uses about 7 grams of filament (PETG). .3 layers with 50%…
Similar to what was done in the model for the V1 here: Card Holder with Drawer by Georges44 | Download free STL model | Printables.com I have modified the V2 with a tray to store various other items as well as your cards. The internal…
My first model for my 3d printer. I created these box inserts as a learning excercise and very happy with the results.
This is remodel of the famous and wonderfully designed Cascade card wallet (Print-in-place). The original author has made a wonderful job of having created this. I have added a personal touch to this, I am uploading a fusion 360 file for…
✨ Welcome to My Printables Page! ✨ Thank you for stopping by! I put a lot of care and detail into creating this model, and I’m excited to share it with you. Each design is made with both function and aesthetics in mind so you can enjoy…
Cascade card wallet with Peak Design Anchors system to connect your wallet to the phone. The wallet it's a remix of one of the most liked and downloaded model of its category, the Anchor system was my design. The small pice was glued in…
A simple but fun skill game! Can you get the ball across the cascades to the finish? This game is easy to print and even easier to assemble. You will also need: 17 screws M3x18 (or slightly longer) 15 washers 13x3.3mm (optional) 2 screws…
I had to keep one of the tracker pads in the old box because there was no way of getting them both to fit. There is substantial lid lift, but at least it will reduce over time as you play the game.
I'm a big fan of "cascade wallets", of which there are various excellent models here on printables (have a look at redyn, Junaling or Billiam). However, I'm missing a practical solution for carrying cash everywhere - an integrated clip is…
I made a modification to the "Labyrinth Fountain" so the water has to cascade over each level. I included the original fountain parts as well. Source https://www.instructables.com/id/3D-printed-fountain/ Here's a video of it in action…
A sculpture depicting cascading levels - abstract art. This is self-supporting and should not require any supports. Please "like" this file if you collect or download it. _________________________________________________ The resin print…
Important • Model has zero tolerance, I wanted to avoid use of glue or screws so that it's very easy to put together (you might have to use pliers or something similar). • Make sure to set up wall ordering outside to inside , so far I…
This is an insert for Cascadero by Dr. Reiner Knizia. It utilizes four trays for player pieces which are divided into three sections for the Envoys, the Flags, and the Setup Pieces. The insert also has one tray for the Farmer Tiles, on…
Case add-on for the newer Tile Slim. There are no openings so that the Tile can't fall out or be separated from the wallet. To put the Tile in the case, I inserted a pause at layer 501 (around 100mm) and slotted the Tile in before…
cascais • bonsai planter modern minimalist bonsai planter, combining an outer shell with an insert for a combination of practicality and aesthetics commercial licence membership available on my patreon ~ dimensions in mm cascais • larger…
Rounded and chamfered edges to provide a better feel in the hand than the original model.
Cascade card wallet with Peak Design Anchors system to connect your wallet to the phone. The wallet it's a remix of one of the most liked and downloaded model of its category, the Anchor system was my design. The small pice was glued in…
Updates: 2026/07/10 : uploaded plain side versions of body and 9 card version Features: 1) Slide lock to secure cards in place 2) Excellent latching to hold cards in place when dispensing 3) Built-in hole for paracord, etc. 4)…
A tray to keep your Cascadia habitat tiles and wildlife tokens organized and accessible. Each habitat tile slot has a matching slot for a wildlife token so they can stay paired properly. This tray makes it easier to pass the available…
Print one of each model. Quick jig/tray holder for your tiles. You can quickly pull out the correct number of tiles you need based on the number of players. Numbers are etched on the bottom of each holder. You should have two extra tiles…
A modified hex tile lid and hex tile holder based on the awesome work of Carson Miller (@CarsonMiller_636678). The back side of the lid was modified to include sockets for four hex tiles and wildlife tokens to keep things organized during…
This remix includes a new container that has holes for drainage and wire plus a stand. Simply glue the stand to the bottom! Print in PETG for longer lasting container.
