Drawer Baby Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An effective baby lock for drawers. I've used it for several months and made some improvements before I published it.…
- Ocena
- 4,636 / 5
- Polubienia
- 200
- Pobrania
- 617
- Wydruki
- 12
- Wyświetlenia
- 3250
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
An effective baby lock for drawers. I've used it for several months and made some improvements before I published it. There are 3 parts "A", "B" and "C". Only "A" and "B" are strictly necessary, and "C" is an option to increase bonding strength to the drawer.
Double-sided tape is necessary for mounting, and in case of using part "C", glue is required (I have used melt glue, and super-glue).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0,2
Infill:
20%
Filament:
[
Clas Ohlsson PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Clas+Ohlsson+PLA&tag=thingiverse09-20) Any
Notes:
Part "B" needs support
Mounting sequence
With part "C" (stronger):
Glue part B on part C. put double sided tape on part C. put temporarily part A in the slot of part B (don't put tape on A yet), with the "hook" facing inwards. position the assembly in the desired position on the drawer (see picture) fix part C to the drawer. now remove part A from the assembly and put double sided tape on it. mount part A carefully back into the slot of part B, without fixing it to the side yet. keep a short distance in between the hook/snap of part A and the border of part B (I use my nail to separate them a little) and when you are happy with the position, fix part A to the side. Without part "C":Same procedure, but put the double sided tape on B instead of C.
Category: Household